Course Content
-
Module 0
-
Module 1 | Knowledge Alignment
-
Session 1
-
Session 2
-
Session 3
-
Session 4
-
Session 5 – Version / Revision
-
-
Module 2 | CAD Standard(s)
-
Session 1 – Template Files
-
Session 2 – Contents Files Part I
-
Session 3 – Contents Files Part II
-
Session 4 – Contents Files Part III
-
Session 5 – Block Alternatives
-
-
Module 3 | Standard Environment Intro
-
Session 1 – The 5G Approach
-
Session 2 – Tools w/in Tool Palette(s) -Part I
-
Session 3 – Tools w/in Tool Palette(s) -Part II
-
Session 4 – Workspace Part I
-
Session 4 – Workspace Part II
-
Session 5 – Workspace
-
-
Module 4 |Parameters Management Intro
-
Session 1 – The 5G Approach
-
Session 2 – SysVarMonitor -Part I
-
Session 3 – SysVarMonitor -Part II
-
Session 4 – SysVarMonitor Deployment
-
Session 5 – Testing the SysVarMonitor Settings
-
-
Module 5 |Project Management Intro
-
Session 1 – The 5G Approach
-
Session 2 – Sheet Sets and Sheet Set Templates
-
Session 3 – Sheet Sets and Sheet Set Templates
-
Session 4 Introducing a New Sheet (Up to 2 minutes Work)
-
Session 5 | Manage your Sheets
-
Session 6 | Manage your Set &/or Subset
-
Session 7 | Manage your Set &/or Subset
-
Session 8 | Manage your Set &/or Subset
-
Session 9 | Manage your Set &/or Subset
-
Session 10 | Manage your Set &/or Subset
-
-
Module 6 |Annotative Features
-
Session 1 – The 5G Approach to Annotative Features
-
Session 2 – The 5G Approach to Annotative Features
-
Session 3 Controlling Annotation Scales
-
-
Module 7 |Parametric Design
-
Session 1 – From Fast ‘Freehand Sketching’ to Super Precise Drafting
-
Session 2 – Combine GEOMETRIC & DIMENSIONAL CNSTRAINTS
-
Session 3 – Fixing ‘Bad-Shape’ Geometry
-
Session 4 – AutoConstrain Tolerances & Sequence – Managing AutoConstrain
-
Session 5 – Parametric Design & Dynamic Blocks
-
-
Module 8 |Data Extraction
-
Session 1 – Data Extraction from Square 1 Vs Data Extraction based on a Template
-
Session 2 – Data Extraction from Square 1 Vs Data Extraction based on a Template
-
Session 3 – Data Extraction
-
Session 4 – Data Extraction
-
-
Module 9 |Extra Tools
-
Session 1 – Tools replacing Commands
-
Session 3 – Running Apps & Macros
-
-
Module 10 |Troubleshooting AutoCAD
-
Session 1 – Characterizing Problems:
-
Session 2 – Characterizing Problems:
-
Session 3 – Comparing Drawings
-
Session 4 – Having Plot/Publish Problems?
-
Session 5 – Using an Appropriate Template File to Fix a non-Cad Standard Compliant File
-
Session 6 – Using Autodesk Screencast to record from w/in AutoCAD
-
Session 7 – BONUS
-
Intro Session
- How is it going to be? Why to keep very calm?
- The Platform: Angles, Recordings, eBooks & more
- Best-Practices-Only Principle
Next
Session 1